Feedback Media Platform: Manual

Up: Cognisys Product Introduction Next Topic: FMP Introduction

The Feedback Media Platform (FMP) is generally used for InfraRed control of DVD/VHS/CD/TV's using InfraRed commands. In the first steps of setup, you will connect the FMP device and test it. The best way to do this is step-by-step, as listed below.

This product is really a combination of two products, the FMP device and the BioMedia Windows application. The following steps will link you into the BioMedia documentation for initial setup, and then return at the end for configuration settings.

FMP Introduction: Overview of the product.
FMP Receive Product: Check contents of your package.
FMP Device Features: Acquaint yourself with the device.
Connect USB Cable: Power up and initial test.
Install BioMedia: Windows Configuration utility
Use BioMedia: General Instructions for Using BioMedia
Connect Control Cable: FMP Supports Digital or Audio control.
- Logic Control: Use "Switch" output to control the DVD player.
- Audio Control: Use Audio output to control the DVD player.
Obtain a DVD Player and TV: You can do this at any time.
- NonToggling: Desired trait of players for FMP use.
- Player Compatibility Guide
Player Initial Test: Test Player control and program if needed.
- Command Sequence Programming: Instructions to capture an arbitrary command sequence.
Panel Operations: Some functions are available from the front and rear panels.
- Capturing IR Commands Using the Panel.
FMP Application Tips: Suggestions for use with popular Biofeedback and Neurofeedback equipment.
BioMedia Manual: Easy configuration and setup using our Windows Application.

Up: Cognisys Product Introduction Next Topic: FMP Introduction